Friday 11 September 2020

O gauge sector plate

O gauge sector plate

 And to return.

Due to the build of the layout being halted due to Peco closing, Warley bailing and me not exactly knowing what was going on, or if it actually had a reason to be built, I didn't get around to sorting the FY. Last weeks photoshoot with Craig didn't really matter as it was all about the pretty side of the layout and it didn't need to run. However... in order for it to move forward in any shape of form it should do. A simple two-road sector should do the trick. Here dummied up with some code 124 bullhead, it will actually consist of some copper clad sleepers and code 100 - to compensate for the sector plate thickness. Trials have proved that this should work, I just need to work the switching out. As you can see there is not a lot of room and I don't want expensive locos dangling over the edge of the board so it'll have to be simple and neat, possibly a centre off DPDT to energise one rail the other permanently live.

2 comments:

  1. Switching...how about micro switches arranged so that each track is only live when it is actually in position? This should help to avoid "incidents" due to operator error.

    ReplyDelete