Been away for a few days in the cold Netherlands and now hitting the ground running with leapfrogging projects. The baseboard for the Nixnie rip-off for the book is done. I don't usually do diagonals, but for something this shape it does stop any twisting. Due to the pointwork dropping over the centre of the side, I had an unusual thinking ahead moment And off-set the V slightly to keep it out of the way. Cunning eh? Fractionally deeper frames than I usually use at 80mm, with 75mm deep for the inside stuff all held together with Resin W and some blocks. I'll screw into the blocks when the outside facia boards are done somewhere down the line.